Rebuilding Hp-85, 9815, 9825 capstan.
Précédent
1
2
3
To rebuild a capstan for the Hp-85, 9815, 9825 tape drive, you need:
- Dremel tool + #402 mandrel + #194 HS cutter.
- Very fine sandpaper 3M 255p or similar,
- Pliers to hold the joint.
- Silicon tap joints: D10mmxd4mmxT4mm.
- Cutter or X-Acto
Check inside diameter
...until you get the adequate size
Left=before, right=after.
And now the Thickness
A simple cutter/Xacto will do
Don't miss the cut!!!